Search results

Has anyone used the x-rite passport color checker software to produce a daylight camera profile for the Nikon D1? I have profiles for the D1x, D2x, and D3x but not the D1. I have a substantial archive of D1 images and would like to apply an actual profile for processing.

I had a Lacie drive fail recently where the power button flashed and there was a drive-like clicking noise coming from the case. The problem was not the drive, but the power supply. Lacie sent a new supply and the unit was fine. FWIW

My experience with Nikon service is that you will more than pleased as tho how they handle this event. I also would not be surprised if you were sent new equipment, provided Nikon confirms that it is truly at fault. Did you receive any communication from them regarding the repair and if so, were...

Try the Demo of NIk Sharpener 3. You'll never use any other!

Open an image in NX2 and check the white balance settings. Switch it from "as shot" to daylight. If the image is corrected, the problem is in your camera settings. If not, it's in your NX2 settings.

What your looking for is an "Inland Marine" policy that covers this type of risk. Keep checking with local agents to see if they can write one to cover your needs.

I have 12gb in the same system and would, personally, not have any less.

You may contact the bank yourself and ask them if they can verify the authenticity of the check.

Thanks. A little pricey, but it looks like a winner!

Yes, I am aware of that. However it is a simple release, not the multipurpose timer the MC-36 is.

I'm considering a new GPS unit for my D2x/D3x. I've looked at the Pc-Mobile GN-1 and the Nikon GP-1. Both use a USB mini to 10pin to connect to the camera. My challenge is I like to also use my MC-36 remote at the same time. With my Garmin GPS there was no problem as I used a MC-35 to connect...

NO question! Define 2.0. Free demo...try it.

From the License agreement posted on Nikons' Site. 1. GRANT OF LICENSE Nikon hereby grants to you a non-exclusive, non-sublicensable, perpetual (subject to the provisions of Sections 1 and 4) license to: a) Use the trial version of the SOFTWARE (“TRIAL SOFTWARE”) on up to two (2) of your...

I'm familiar with the mapping as I use it now. I was referring to the physical footprint of the 4-large.

The work area of the Intuos 4 medium seems a little small if you are using a dual monitor setup and the physical size of the large is to big for my workspace. I must admit it's cool and the Wacom tech guy I spoke to recently indicated that the pen requires very little pressure to use effectively.

I have used CorelDraw for 14 years, currently X4, and I like it. I have recently added Illustrator as part of a bundle I bought form Adobe at a price to good to pass up. I believe that the inherent compatibility between Illustrator and Photoshop will prove a benefit in cross-program production.

Nice retouching job. The reflections in the body, however, do not match and carry the mood of the backdrop diminishing your retouching accomplishments making it look as if the two elements were just thrown together.

If you use Capture NX2, the control point function does a lot of what Viveza can do. It has a slight advantage of making the changes in the RAW image as opposed to a processed image for use in Photoshop. Viveza does offer the ability to correct older images without going back to the RAW.

I always save a master corrected image, without sharpening, in the native size from the camera. I will then up size or downsize as the individual need requires. Only then do I sharpen the finished image and save it as a new file, but I never save the master corrected image with sharpening included.

Have you reviewed your event viewer to see if there may be a clue as to what caused the failure?

The only hitch so far has been that when I go to adjust prefs in NxView, an error message pops up about an invalid parameter, then the prefs come up as normal. I removed it and loaded all the 32 & b4 bit C++ variations from Microsoft, but it did not correct. A minor annoyance only. However, I am...

Not in my opinion. A primary objective of a 64bit system is the Ram headroom improvement. To use it with 2gb is a poor choice.

I need more flexibility from an image program than your post noted. I've been working with graphics programs since the early '90's. Then, you were grateful that a software program even worked. Much has changed since then, I actually am now demanding that software perform to my needs or I...

I just completed work on a new system consisting of the following: Intel i7 processor 2.93ghz with Hyper-threading (Shows as 8 cores) 12gb DDR3 Ram Windows Vista Ultimate 64bit Sapphire 4670 Graphics Card 1gb DDR3 ram The net result is that NX2 is still painfully slow. If I have 3 images open...

I was speaking with Nikon Tech Support on various issues and asked about NX2s' performance on 64bit systems. The reply was that NX2 hates 64bit OS's and did not recommend the combination. Any feedback from NX2/64bit users would be appreciated.

Sorry...I just thought you were looking for warm and fuzzy. I will try and post new images next week.

The Sadness is Over! My 3x is here. The deal was too good to pass up. I'm off to Hawaii for three weeks of great images.

I received a call from my dealer yesterday offering me his first D3x that is arriving at his store today. I asked for a couple of hours to make up my mind. After reviewing all the info I could in that time, I came to the gut-wrenching conclusion that I was left with too many questions...

Done! Fixed!

I have some missing or corrupted font files in my 32bit Vista Ultimate system. It is the only Vista PC I am running. The OS was preloaded by Sony without a Disc provided. Sony tells me that they simply cannot send me the font files. If anyone has a new system with the original files loaded...

I would also add Norman Camera, Kalamazoo, MI to the list. They're first class. They even shipped a back ordered lens to me, overnight, on location in Hawaii at their expense. Also, they are great at returns.

Uploading pic files and slow internet download speeds would indicate a hardware/software related issue. Have you added any new programs or upgraded any software between the times you noticed the speed change? If you have, delete the new programs or roll back the update and see if that restores...

Well, after searching for some time, I am still considering the Dell 3008 monitor. However, recently I became aware that Eizo has begun offering a 30" monitor, CG301. As always, Eizos' pricing is in the stratosphere MSRP $5299 - Street $4700 vs Dell at MSRP $1999 - Street $1715. The Eizo reps...

Nik Define 2..it's the Best I have used.

My Sony 23" 16 x 9 monitor is starting to give me claustrophobia. I'm looking at a DELL ULTRASHARP 3008WFP 30in LCD MONITOR. It's specs are pretty decent and unlike the Apple units, is Windows friendly. Anyone have an opinion on this unit?

If you have the mechanical ability you say, and can remember how to reverse the steps to take it apart and put it back together, you should have no problem.

The first time I attempted to alter a simple light blue sky, I wound up changing the whole image. I called NIK and was told to drop in control points in the areas I did not want changed to lock them. This resulted in multiple attempts as was needed to determine all the areas that were changing...

Yes, I still have working versions of CS2 and CS3 in different directories.

If your on a tight budget, try Fred Miranda's SI Pro. It is a PS plug-in.

Here it is. http://www.dxo.com/en/photo/free_demo

I filled out a download request about two minutes ago and had an instant reply with a download link. Maybe you should fill out another request.

So long as DxO will not support the D1 and D1x, I consider the software cost ineffective. There are millions of images taken by these cameras and they are simply ignored. The DxO people just tell me to use the form on their site to request the addition of these bodies. Fat chance that will happen!

I agree the Nikon 5000 is a very good 35mm neg scanner!

I am in the area, and will watch for any sign of them popping up for sale! I hope it was all insured...Good Luck!

With the D3/(Maybe D3x) FF sensors...my 15mm rectilinear f:3.5.

To my knowledge, Dfine is a Photoshop/Elements plug-in only.

Before you buy Noise Ninja, by all means try Dfine 2.0. In my opinion, it is the best noise reduction software on the market.

Either program will allow preview if you select the drive and folder where the images are stored. In Capture NX simply select the folder in the file directory fly-out and open the Browse fly-out and the images should load. The process in Bridge requires you to select the proper drive/folder and...

I did some testing on UV filters and did see a noticeable amount of edge flare, on lower cost filters, when used with wide angle lens. I would recommend the thinest filter you can find. I use the Hoya DMC or HMC filters.

These images show no surprises. They only fortify the original specs of the D3. If you want low noise and little or no gain in image sharpness and the tech goodies, then get your cash ready. For me, it's not enough to upgrade my D2x. If or when Nikon shows me a camera that provides a true...