Help (d200)

Joined
Jun 3, 2005
Messages
1,961
Location
CT
D200 is shooting as I will call it a black picture 1st shot out of the camera after it has been powered off for at least a couple of hours.. and yes i have taken the lens cap off... up load the photo and all the data is there..but shows black.. and is not showing that frame as locked either, any ideas?
if needed I can load the blank photo and show it here..


Thanks in advance
Tim
 
Joined
Nov 10, 2008
Messages
3,952
Location
Chicago
Always reformat a card, never erase. The card`s File Allocation Table gets screwed up eventually and you can get fragmented image storage just like a computer.

Make sure the card pins look good.

Clean all the contacts like the battery.

After that make sure the mirror is going up and shutter is opening. Shutter delay mode and no lens will help isolate sounds.
 

Latest posts

Links on this page may be to our affiliates. Sales through affiliate links may benefit this site.
Nikon Cafe is a fan site and not associated with Nikon Corporation.
Forum post reactions by Twemoji: https://github.com/twitter/twemoji
Copyright © 2005-2019 Amin Forums, LLC
Top Bottom