Help with using PW11 as remote camera release

Joined
May 23, 2010
Messages
545
Location
Abingdon
I do admit I think I might be doing something stupid here.:confused:

Trying to use a PW11 as a remoite camera release on my D800, I am connecting it with a Pocketwizard 10 pin remote cable to the 10 pin socket- plugged into the camear/flash socket on the PW11. I have tried usinga single PW11 and a pair with acting as a remote.

PW11 set to both on transit mode.

But when I do nothing happens on the D800. I have also tried it on my D300s with no sucess.
I am strating to think I am missing something simple.

Things I have tried,
Have 4 PW11, I have tried all 4 PW11 either on there own or in a combination using one a remote trigger (PW11 are set on the same channel).

Fresh batteries in PW11.

Another 10pin remote cable.

Hope all my rambling makes sense:smile:
 
Joined
May 23, 2010
Messages
545
Location
Abingdon
  • Thread Starter Thread Starter
  • #2
Sorted now.

I had the cable puched in to far on the PW11 pulled it up a fraction and it works fine :)
 

Latest posts

Links on this page may be to our affiliates. Sales through affiliate links may benefit this site.
Nikon Cafe is a fan site and not associated with Nikon Corporation.
Forum post reactions by Twemoji: https://github.com/twitter/twemoji
Copyright © 2005-2019 Amin Forums, LLC
Top Bottom