LR Crop to print issue

Joined
Dec 6, 2006
Messages
16,847
Location
West of Boston
I finally got around to writing about this...regarding LR2 cropping.

In this image, I'm cropping a 5x7 from the full size image. I'm using the LR 5x7 crop selection. (It also happens w/ 4x6 & 8x10)

Initial%20Crop.jpg
Subscribe to see EXIF info for this image (if available)


In the next image, I have switched to the print module and you can see the tiny margin on the right hand side. Many times I don't have the latitude to click on "Zoom to fill" either because I've shot tightly in the first place or other reasons. And my thinking is that this would show up in the print.

Print.jpg
Subscribe to see EXIF info for this image (if available)


As you can see by the detailed settings, margins are set to '0' and the cell size is a full 5x7.

Print%20settings.jpg
Subscribe to see EXIF info for this image (if available)


Any thoughts on what's going on? Or perhaps this is fixed in LR3?

TIA.
 
Joined
Feb 24, 2006
Messages
10,853
Location
Gulu, Uganda
It looks like something in the printer set up size.
Try setting up as Print to JPEg and set the custom size there to 7x5 and see if you still have the same issue.
 
Joined
Feb 24, 2006
Messages
10,853
Location
Gulu, Uganda
OK, I can replicate this if using 7x5" in the print module with export to jpeg.
I think this might come about from converting from cm to inches in the module.
If I set the page size in mm 127x178 there is no issue however the 178mm converts to 7.01 inches.
You can file a bug report for that......:wink:
 

Latest posts

Links on this page may be to our affiliates. Sales through affiliate links may benefit this site.
Nikon Cafe is a fan site and not associated with Nikon Corporation.
Forum post reactions by Twemoji: https://github.com/twitter/twemoji
Forum GIFs powered by GIPHY: https://giphy.com/
Copyright © Amin Forums, LLC
Top Bottom