Nikon D500 - no playback with 10 pin remote trigger attached

Joined
Oct 29, 2020
Messages
1
Hi,

I just purchased a used Nikon D500.
I attached a remote trigger release via the 10pin.
The trigger works fine and the shutter fires. But no playback shows up on the back of the camera when the 10pin is attached.
When I remove the 10pin I can scroll through the shots.
As a real estate photographer, this will not work in the field.
Anyone know of a fix?
 
Joined
Feb 12, 2006
Messages
1,191
Location
England
My mc30a works fine with my D500. I suggest you try another remote cord, and if that doesn’t work, the camera is faulty. Have you checked the pins in the camera socket? It might be worth playing around with settings, use A mode, then S mode etc. Also update the camera firmware to the latest version.

Also, is the camera configured to not show playback when a shot is taken?
 
Links on this page may be to our affiliates. Sales through affiliate links may benefit this site.
Nikon Cafe is a fan site and not associated with Nikon Corporation.
Forum post reactions by Twemoji: https://github.com/twitter/twemoji
Copyright © 2005-2019 Amin Forums, LLC
Top Bottom