reverse a 50mm 1.8 on Nikon 105 VR

Joined
Jun 26, 2006
Messages
729
Location
Douglasville, GA
A step-ring will be male on one side and female on the other... what you'll need is either a coupler ring (male-male) that has different sizes or combine a 52mm coupler with a step-down-ring.
 
Joined
Feb 10, 2007
Messages
537
Location
MA
You can get a 62mm-52mm step down ring and a 52mm-52mm macro coupler.
These are done with my D70, 105mm VR, 1.7xTC, and a reverse 50mm. Very little to no vignetting.
Subscribe to see EXIF info for this image (if available)

View attachment 89983
Size reference
View attachment 89984
 
Joined
Feb 27, 2006
Messages
89
USA is not the only place in this world. There is a Europe to. Ordering from US will cost more then double!
 
Joined
Feb 27, 2006
Messages
89
is it possible to do this
Adapterring Koppling - 52mm - 52mm
mc5252
1 st - à 49,00 kr
Step Down - ringar - 62mm - 58mm
62-58
1 st - à 49,00 kr
Step Down - ringar - 58mm - 55mm
58-55
1 st - à 39,00 kr
Step Down - ringar - 55mm - 52mm
55-52
1 st - à 39,00 kr


or will it wont work
 
Joined
Feb 27, 2006
Messages
89
This is my last post about rev50. I promise!

I have a Nikon 105VR and a Nikon 50mm 1.8. I want to add my 50mm 1.8 on my 105VR to gain 2:1 magnification. (I think its 2:1 it becomes.)

The 105 VR have filter diameter 62mm
The 50mm 1.8 have filter diameter 52mm

So what I need is a coupler 52mm-52mm AND StepDown 62-52 mm??

That will all work, or do I need a stepup ring? Im confused with all this, but Im sure it will be more clear when I have the stuff and play with them.

I would be very glad to get this answerd so fast as possible so i can order it asap. :)
 
Links on this page may be to our affiliates. Sales through affiliate links may benefit this site.
Nikon Cafe is a fan site and not associated with Nikon Corporation.
Forum post reactions by Twemoji: https://github.com/twitter/twemoji
Copyright © 2005-2019 Amin Forums, LLC
Top Bottom