Yongnuo - Nikon YN568EX flash YN622N-TX wireless flash controller YN622N Trigger HELP

Joined
Oct 27, 2007
Messages
449
Location
Warminster Pa.
Hi All

I have not been on here in awhile and could use your help

Hi All
Yongnuo - Nikon YN568EX flash YN622N-TX wireless flash controller YN622N Trigger

Previously all this has worked. My Yongnuo flashes are not going off when I take a photo. My Nikon SB910 does work. I have all on channel 1 Group A.
I have not had all this hooked up in a while so my recollection of everything is vague. I am using a
Nikon D610

I would appreciate any help I can get.
Thanks
 
Last edited:
Joined
Oct 27, 2007
Messages
449
Location
Warminster Pa.
Hi All

I have not been on here in awhile and could use your help

Hi All
Yongnuo - Nikon YN568EX flash YN622N-TX wireless flash controller YN622N Trigger

Previously all this has worked. My Yongnuo flashes are not going off when I take a photo. My Nikon SB910 does work. I have all on channel 1 Group A.
I have not had all this hooked up in a while so my recollection of everything is vague. I am using a
Nikon D610

I would appreciate any help I can get.
Thanks

I figured out what it was. Putting the receiver on the hot shoe on the camera it was not connecting. I had to back it out a little bit and now it works fine.
 
Links on this page may be to our affiliates. Sales through affiliate links may benefit this site.
Nikon Cafe is a fan site and not associated with Nikon Corporation.
Forum post reactions by Twemoji: https://github.com/twitter/twemoji
Copyright © 2005-2019 Amin Forums, LLC
Top Bottom